 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Marketing Bulletin DATE: TO: FROM: RE: May 1st, 2008 All Sales Personnel Isaac Gonzalez Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series EC1 EC2 Description Resistance Welded Short HC-49/US Crystal Resistance Welded HC-49/US Crystal Recommended Replacement E1U Series E2U Series In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 EC1 Series * HC-49/US short package * AT or BT cut available * Resistance weld seal * Tight tolerance/stability * Tape and reel, insulator tab, and custom lead length options available NOTES EC1 H 2.50 L 11.18 W 4.70 CRYSTAL _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) 3.579545MHz to 50.000MHz 50ppm / 100ppm (Standard), 30ppm / 50ppm (AT cut only), 15ppm / 30ppm (AT cut only), 15ppm / 20ppm (AT cut only), or 10ppm / 15ppm (AT cut only) 0C to 70C (Standard), -20C to 70C (AT cut only), or -40C to 85C (AT cut only) 5ppm / year Maximum -40C to 85C 7pF Maximum 500 Megaohms Minimum at 100VDC 1 mWatt Maximum 18pF (Standard), Custom CL 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range 3.579545MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7.999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 14.999MHz MANUFACTURER ESR () 200 Max 150 Max 120 Max 90 Max 80 Max 70 Max CATEGORY Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT SERIES Frequency Range 15.000MHz to 15.999MHz 16.000MHz to 23.999MHz 24.000MHz to 30.000MHz 24.000MHz to 40.000MHz 28.6363MHz to 29.999MHz 30.000MHz to 50.000MHz PACKAGE ESR () 60 Max 50 Max 40 Max 40 Max 150 Max 100 Max CLASS Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / BT Third Overtone / AT Third Overtone / AT REV.DATE ECLIPTEK CORP. CRYSTAL EC1 HC-49/US Short CR22 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC1 A - T - 20 - 30.000M - I2 TR FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C H=15ppm at 25C, 30ppm from -40C to 85C J=15ppm at 25C, 20ppm from 0C to 70C K=15ppm at 25C, 20ppm from -20C to 70C L=15ppm at 25C, 20ppm from -40C to 85C M=10ppm at 25C, 15ppm from 0C to 70C N=10ppm at 25C, 15ppm from -20C to 70C MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 42) I2=Insulator Tab (See Page 42) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT B=Fundamental / BT T=Third Overtone / AT OBSOLETE TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS 1000 Pieces per Reel Compliant to EIA-468B Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC1 HC-49/US Short CR22 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC2 Series * HC-49/US package * AT or BT cut available * Resistance weld seal * Tight tolerance/stability * Tape and reel, insulator tab, and custom lead length options available NOTES EC2 H 3.68 L 11.18 W 4.70 CRYSTAL _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) 3.579545MHz to 50.000MHz 50ppm / 100ppm (Standard), 30ppm / 50ppm (AT cut only), 15ppm / 30ppm (AT cut only), 15ppm / 20ppm (AT cut only), or 10ppm / 15ppm (AT cut only) 0C to 70C (Standard), -20C to 70C (AT cut only), or -40C to 85C (AT cut only) 5ppm / year Maximum -40C to 85C 7pF Maximum 500 Megaohms Minimum at 100VDC 1 mWatt Maximum 18pF (Standard), Custom CL 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range 3.579545MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7.999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 14.999MHz ESR () 200 Max 150 Max 120 Max 90 Max 80 Max 70 Max Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Frequency Range 15.000MHz to 15.999MHz 16.000MHz to 23.999MHz 24.000MHz to 30.000MHz 24.000MHz to 40.000MHz 28.6363MHz to 29.999MHz 30.000MHz to 50.000MHz ESR () 60 Max 50 Max 40 Max 40 Max 150 Max 100 Max Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / BT Third Overtone / AT Third Overtone / AT MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2 HC-49/US CR04 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC2 A - T - 20 - 30.000M - I2 TR FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C H=15ppm at 25C, 30ppm from -40C to 85C J=15ppm at 25C, 20ppm from 0C to 70C K=15ppm at 25C, 20ppm from -20C to 70C L=15ppm at 25C, 20ppm from -40C to 85C M=10ppm at 25C, 15ppm from 0C to 70C N=10ppm at 25C, 15ppm from -20C to 70C MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel AVAILABLE OPTIONS Blank=None (Std) CLXXX=Custom Lead Length (See Page 42) I2=Insulator Tab (See Page 42) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT B=Fundamental / BT T=Third Overtone / AT OBSOLETE TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS 1000 Pieces per Reel Compliant to EIA-468B Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2 HC-49/US CR04 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EC1G-20-30000M-I2TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |